PKBL5
4000 WATT INSTALLATION KIT
• 17' 1/0GA clear blue power cable with 3/8'' ring terminal
• 1 ANL fuse holder + 200 amp fuse
• 3' 1/0GA clear silver ground cable with #10 ring terminal
• 1 ANL fuse power distribution block + 2 pcs 100 Amp fuse
• 8' 4GA clear blue power cable • 1 battery terminal
• 6' 4GA clear silver ground cable • 1 ground distribution
block
• 17' 18GA remote turn-on wire • All necessary hardware
$114.50
|
PKBL4
2000 WATT INSTALLATION KIT
• 17' 4GA clear blue power cable• 3' 4GA clear silver
ground cable
• 10' 8GA clear blue power cable• 3' 8GA clear silver
ground cable
• 17' neon blue series RCA cable• 16' 18GA blue remote
turn-on wire
• 6' split loom tubing • 1 ANL fuse holder + 100
• 1 AGU fuse power distribution + 2 pcs 40 amp fuse •
1 battery terminal
• 1 ground distribution • Speaker wire
• All necessary hardware for installation
$66.92
|
| PKBL3-CAP
1500 WATT INSTALLATION KIT
• 20’ clear blue power cable • 6’ clear
silver ground cable
• 17’ RCA cable • 17’ blue remote turn-on
wire
• 8’ clear silver speaker cable • 6’ split
loom tubing
• 1F capacitor with digital voltage meter
• (1) AGU fuse holder + 60 AMP fuse
• (5) 4 gauge ring terminals • (1) 4 gauge ground terminals
• (2) 4 gauge spade terminals • (2) 4 gauge grommets
• (10) 6” cable ties • (4) .25” female quick
disconnect terminals
$102.00 |
1500 WATT
INSTALLATION KIT
• 17' 4GA clear blue power cable
• 3' 4GA clear silver ground cable
• 17' neon blue series RCA cable
• 17' 18GA blue remote turn-on wire
• 30' 16GA clear silver speaker cable
• 6' split loom tubing
• 1 AGU fuse holder + 60 AMP fuse
• All necessary hardware for installation
$35.18
|
| PKBL2
1000 WATT
INSTALLATION KIT
• 17' 8GA clear blue power cable
• 3' 8GA clear silver ground cable
• 17' 18GA blue turn-on wire
• 25' 16GA speaker wire
• 17' neon blue series RCA cable
• 1 AGU fuse holder + 40 AMP fuse
• All necessary hardware for installation
$21.94 |
PKBL1
800 WATT
INSTALLATION KIT
• 20' 10GA clear blue power cable
• 2' 10GA clear silver ground cable
• 17' neon blue series RCA cable
• 20' 18GA clear blue speaker wire
• 16' 18GA clear blue remote turn-on wire
• 1 ATC fuse holder + 30 AMP ATC fuse
• All necessary hardware for installation
$15.92
|
PKRD3
1500 WATT
INSTALLATION KIT
• 17' 4GA red braided power cable
• 3' 4GA black braided ground cable
• 17' RCA cable
• 25' 16GA speaker wire
• 17' 18GA blue remote turn-on wire
• 1 AGU fuse holder + 60 AMP fuse
• All necessary hardware for installation
$33.24 |
PKRD2
1000 WATT
INSTALLATION KIT
• 17' 8GA red power cable
• 3' 8GA black ground cable
• 17' RCA cable
• 25' 16GA speaker wire
• 17' 18GA blue remote turn-on wire
• 6' split loom tubing
• 1 AGU fuse holder + 40 AMP AGU fuse
• All necessary hardware for installation
$19.26 |
| PKRD1
800 WATT
INSTALLATION KIT
• 18' 10GA red power cable
• 4' 10GA black ground cable
• 17' RCA cable
• 17' blue remote turn-on wire
• 30' 16GA speaker wire
• ATC in-line fuse holder + 30 AMP ATC fuse
• All necessary hardware for installation
$16.06 |
| ISPKBL4-BG
1500 WATT
INSTALLATION KIT
• 17' Power cable• 3' Ground cable
• 17' Twisted pair interconnect
• 17' Blue remote turn-on wire
• 8’ Speaker wire • 6' Split loom tube
• (1) AGU fuse holder + 60 Amp fuse
• All necessary hardware for installation
$29.76 |
ISPKBL8-BG
1000 WATT
INSTALLATION KIT
• 17' Power cable • 3' Ground cable
• 17' Twisted pair interconnect
• 17' Blue remote turn-on wire
• 8’ Speaker wire • 6' Split loom tube
• (1) AGU fuse holder + 40 Amp fuse
• All necessary hardware for installation
$18.84
|
|
C1.0FM
1 FARAD CAPACITOR
20 VDC, 24 VDC SURGE, LOW ESR
• 1 Farad, 20Volts DC with Digital Monitor
• Red/green polarity LEDs and audible warning
• Hi/Lo voltage indication (8-16V)
• ESR less than 0.002 Ohm
• Hard gold plated brass terminals
$39.50
|
C1.5FM
$53.90
1.5 FARAD CAPACITOR
WITH DIGITAL MONITOR
• 1.5 Farad, 20 volts DC with digital monitor
• Red/green polarity LEDs and audible warnings
• Hi/Lo voltage indication (8-16V)
• ESR less than .002 Ohm
• Hard gold plated brass terminals
• Mounting brackets and hardware included
|
C2.0FM
2 FARAD CAPACITOR
WITH DIGITAL MONITOR
• 2 Farad, 20 volts DC with digital monitor
• Red/green polarity LEDs and audible warnings
• Hi/Lo voltage indication (8-16V)
• ESR less than .002 Ohm
• Hard gold plated brass terminals
• Mounting brackets and hardware included
$55.81 |
C2.5FM
2 FARAD CAPACITOR
WITH DIGITAL MONITOR
• 2.5 Farad, 20 volts DC with digital monitor
• Red/green polarity LEDs and audible warnings
• Hi/Lo voltage indication (8-16V)
• ESR less than .002 Ohm
• Hard gold plated brass terminals
• Mounting brackets and hardware included
$61.70
|
|
C1F
1 FARAD CAPACITOR
20 VDC, 24 VDC SURGE, LOW ESR
• 1 Farad, 20Volts DC
• ESR less than 0.002 Ohm
• 24K hard gold plated brass terminals
$ 35.00
|
|
PHDRT1 $6.86
RING TERMINAL
1/0GA IN, HEAVY-DUTY
• Platinum-look finish
• Resistant to corrosion
• High current capability |
PHDRT4 $5.28
RING TERMINAL
4GA IN, HEAVY-DUTY
• Platinum-look finish
• Resistant to corrosion
• High current capability |
|
|
GHDRT1 $4.35
RING TERMINAL
1/0GA IN, HEAVY-DUTY
• 24K hard gold plated
• Resistant to corrosion
• High current capability |
GHDRT4 $3.36
RING TERMINAL
4GA IN, HEAVY-DUTY
• 24K hard gold plated
• Resistant to corrosion
• High current capability |
|
|  
Raptor Pro Series interconnect cables feature an ultra low noise
cancellation system. Twisted pair construction at 4 turns per inch
and woven copper outer shield eliminate the possibility of any
radiated noise entering your system.
Also featured is the “Pro Series” exclusive small metal
RCA
connector plugs finished in nickel and gold. An ultraflex jacket
completes the package.
|
Raptor neon blue series double-shielded audio interconnect cables
feature
low-noise braid and foil shields for maximum traditional noise rejection.
extended range and frequency response are maintained with pure oxygen-free
copper strands and 24K hard gold-plated split tips and rings. A
convenient turn-on
wire is molded in. The highly flexible and durable blue tinted outer
jackets
are complemented by molded strain reliefs and color-coded channel
identification, adding the right touch to any installation.
|
 |
2-CHANNEL RED HOT SERIES TWISTED PAIR AUDIO CABLE
w/FOIL SHIELDING |
| Raptor Red hot Series twisted-pair audio interconnect
cables are a great affordable step up in performance and quality
from the standard. A highly effective foil shield adds to the
excellent noise rejection, along with pure oxygen-free copper
strands for total signal integrity. The highly flexible and
durable red tinted jacket is complimented by molded strain relief
pants and color-coded channel identification over the 24K gold-plated
split tips and rings. |
 |
|
|
Raptor takes the right angle to RCA audio cable design with its
new Twisted blue (Twb) Series. designed with right angle plugs for
easier installation, the Tb Series cables feature lownoise twisted-pair
construction with three turns per inch over the two turns per inch
typical with comparable cables. Such precise construction ensures
excellent frequency response and performance. other high-quality
features include gold-plated split tips and rings, a tough, flexible
transparent clear outer jacket and strain reliefs.
| TWB-10RA |
RCA
CABLE 10 ft (1 RIGHT ANGLE END) |
$4.02 |
| TWB-14RA |
RCA
CABLE 14 ft (1 RIGHT ANGLE END) |
$4.76 |
| TWB-17RA |
RCA
CABLE 17 ft (1 RIGHT ANGLE END) |
$5.60 |
| TWB-20RA |
RCA
CABLE 20 ft (1 RIGHT ANGLE END) |
$6.14 |
| TWB-25RA |
RCA
CABLE 25 ft (1 RIGHT ANGLE END) |
$7.10 |
| TWB-3RA |
RCA
CABLE 3 ft (1 RIGHT ANGLE END) |
$2.38 |
| TWB-6RA |
RCA
CABLE 6 ft (1 RIGHT ANGLE END) |
$2.92 |
| TWB-Y1RA |
RCA
Y CABLE (1 FEMALE TO 2 MALE) (1 RIGHT ANGLE END) |
$1.50 |
| TWB-Y2RA |
RCA
Y CABLE (1 MALE TO 2 FEMALE) (1 RIGHT ANGLE END) |
$1.50 |
|
| |
  |
| Raptor installation Series provides a high-performance
value in mobile audio cable interconnects. Excellent dynamic
range, frequency response and signal clarity are featured
in this quality cable. only pure oxygen-free copper strands
are used for the conductors and noise-rejecting spiral shield.
24K gold-plated split tips and rings maintain connection integrity.
Color-coded channel identification and durable tinted jackets
are also included. |
| |
|
|
|
BARREL CONNECTORS
RCA JACK To RCA JACK (FEMALE) PAIR
• Gold Female to Female
• 24K hard gold-plated
• Resistant to corrosion |
|
BARREL CONNECTORS
RCA PLUG To RCA JACK RIGHT ANGLE PAIR
• Gold Male to Female
• Right Angle
• 24K hard gold-plated
• Resistant to corrosion |
|
BARREL CONNECTORS
RCA JACK To RCA JACK (MALE) PAIR
gRCAbm
• Gold Male to Male
• 24K hard
gold-plated
• Resistant to corrosion |
|
FPC1G
1 FT. FUSED POWER CABLE AGU FUSE HOLDER
4GA RED CABLE, 60 AMP FUSE WITH STATUS LED
$8.40
|
FPC1P
FUSED POWER CABLE
AGU FUSE HOLDER
1 FT. 4GA BLUE CABLE, 60 AMP FUSE wITH STATUS LED
$9.60 |
| FPC2G
FUSED POWER CABLE ANL FUSE HOLDER
1 FT 1/0 RED CABLE AND FUSE HOLDER
250 AMP FUSE WATER RESISTANT
$19.54
|
FPC2P
FUSED POWER CABLE ANL FUSE HOLDER
1 FT. 1/0GA BLUE CABLE,
250 AMP FUSE WATER RESISTANT
$19.80
|
| FPC4G
FUSED POWER CABLE
AGU FUSE HOLDER
1 FT. 4GA RED CABLE, 60 AMP FUSE
$7.90
|
GFBW1
Gold Series In-Line AGU Fuse Holders - Black Caps
# 4-gauge or 8-gauge in/out
# Resistant to corrosion
# 60 AMP high current capability
# Solid brass terminals
$2.78 |
| GFBW2
Gold Series AGU Fuse Holder - Clear Caps
# 4 or 8 AWG in/out
# Resistant to corrosion
# 60 Amp high current capability
# Solid brass terminals
$2.78
|
GFBW4-ANL
Gold Series ANL Fuse Holder
# 1/0 or 4AWG in/out
# Resistant to corrosion
# 24K hard gold plated terminals
# Durable injection molded and heat-resistant
# Tinted acrylic base and clear acrylic cover
$13.42 |
GFBW5-ANL
Gold Series In-Line ANL Fuse Holder
# 1/0-gauge or 4-gauge in/out
# 24K hard gold-plated
# Resistant to corrosion
# Durable injection molded and heat-resistant
# Tinted acrylic base and clear acrylic cover
# High current capability
$14.32 |
PFBW1BL-AGU
AGU FUSE HOLDER 4GA IN/OUT WITH STATUS LED
• Blue LED fuse status indicator
• Water-resistant design
• High current capability
• Durable injection molded, blue tint acrylic housing
$5.88 |
| PFBW1-ANL
ANL FUSE HOLDER 1/0 OR 4GA IN/OUT
• Platinum-look finish
• Water-resistant design
• 24K hard gold-plated hardware
• High current capability
• Durable injection molded, clear acrylic housing
$14.76 |
PFBW2-ANL
ANL FUSED DISTRIBUTION BLOCK 2 POSITION,
1/0 OR 4GA IN, 4 OR8GA OUT WITH STATUS LEDs
• Platinum-look finish
• Super-bright blue fuse status LED
• 24K gold-plated hardware
• Durable injection molded, heat resistant,
blue acrylic base and clear cover
$19.30 |
PFBW3-ANL
ANL FUSE BLOCK 1 POSITION,
1/0 OR 4GA IN, 1/0 OR 4GA OUT WITH STATUS LEDs
• Platinum-look finish
• Super-bright blue fuse status LED
• 24K gold-plated hardware
• Durable injection molded, heat resistant,
blue acrylic base and clear cover
$17.24 |
PFDB2-AGU
AGU FUSED DISTRIBUTION BLOCK
2 POSITION, (3) 4GA IN, (2) 8GA OUT
• Platinum-look finish
• Resistant to corrosion
• Durable injection molded, heat
resistant, blue acrylic base and clear cover
$10.74 |
| PFDB2-ANL
ANL FUSED DISTRIBUTION BLOCK
2 POSITION, (1) 1/0 IN, (2) 4GA OUT
• Platinum-look finish
• 24K gold-plated hardware
• High current capability
• Durable injection molded, heat
resistant, blue acrylic base and clear cover
$16.08 |
GFDB2-AGU
Gold Series AGU Fused Distribution Block - 2 Position
# 4-gauge in to 8-gauge out
# 24K hard gold-plated
# Resistant to corrosion
# Durable injection molded and heat resistant
# Tinted acrylic base and clear acrylic cover
$9.94
|
| GFDB3-AGU
Gold Series Fused Distribution Block - 3 Position
# 4GA in to 8GA out
# Resistant to corrosion
# 24k gold-plated
$14.30
|
GFDB4-AGU
Gold Series Fused Distribution Block - 4 Position
# AGU fuse, 4 AWG
# Resistant to corrosion
$17.56
|
RGFDB2-AGU
AGU FUSED DISTRIBUTION BLOCK
2 POSITION, (1) 4GA IN TO (2) 8GA OUT
• Rose Gold finish
• Gold plated hardware
• Up to 80 AMPS current handling
• Durable heat resistant base and cover
$9.16 |
RGFDB2-MANL
MINI ANL FUSED DISTRIBUTION BLOCK
2 POSITION, (1) I/O IN TO (2) 4GA OUT
• Rose Gold finish
• Gold plated hardware
• High current handling
• Durable heat resistant base and cover
$11.82 |
| RGFH2-ANL
ANL FUSED DISTRIBUTION BLOCK
2 POSITION, (1) 1/0 IN TO (2) 4GA. OUT
• Rose Gold finish
• Gold plated hardware
• Extra high current handling
• Durable heat resistant base and cover
$19.68 |
RGFH-ANL
ANL FUSED DISTRIBUTION BLOCK
1 POSITION, I/O IN TO I/O OUT
• Rose Gold finish
• Gold plated hardware
• High current handling
• Durable heat resistant base and cover
$11.01 |
| RGFHW-ANL
ANL FUSE HOLDER
I/O IN AND OUT
• Rose Gold finish
• Gold plated hardware
• High current handling
• Water resistant
• Unique easy fuse replacement design
• Durable heat resistant cover
$13.19 |
RGFHW-LED
MINI ANL FUSE HOLDER
4GA IN AND OUT WITH STATUS LED
• Rose Gold finish
• Gold plated hardware
• Water resistan
• Red fuse status indicator LED
• Durable heat resistant base and cover
$6.76 |
RGFHW-MANL
MINI ANL FUSE HOLDER
4GA OR 8GA IN AND OUT
• Rose Gold finish
• Gold plated hardware
• Water resistant
• Durable heat resistant base and cover
$5.35 |
RGDB-12
DISTRIBUTION BLOCK
(1) I/O IN TO (2) 4GA OUT
• Rose Gold finish
• Gold plated hardware • Water resistant
• Durable heat resistant base and cover
$7.41 |
| RGDB4
DISTRIBUTION BLOCK
(1) I/O IN TO (4) 4GA OUT
• Rose Gold finish
• Gold plated hardware
• Durable heat resistant base and cover
$13.12 |
RGDB-14
DISTRIBUTION BLOCK
(1) 4GA IN TO (4) 8GA OUT
• Rose Gold finish
• Gold plated hardware
• Water resistant
• Durable heat resistant base and cover
$8.66 |
| RGDB-123
DISTRIBUTION BLOCK
(1) I/O IN TO (2) 4GA AND (3) 8GA OUT
• Rose Gold finish
• Gold plated hardware
• Durable, heat resistant base and cover
• Flexible output side design
$8.11 |
PDB1
DISTRIBUTION BLOCK
(1) 4GA IN, (2) 8GA OUT
• Platinum-look finish
• 24K hard gold-plated hardware
• Resistant to corrosion
• Durable injection molded, black base and clear acrylic cover
$9.15 |
| PDB2
DISTRIBUTION BLOCK
(1) 4GA IN, (4) 8GA OUT
• Platinum-look finish
• 24K hard gold-plated hardware
• Resistant to corrosion
• Durable injection molded, black base and clear acrylic cover
$9.15 |
PDB3
DISTRIBUTION BLOCK
(1) 1/0 IN, (4) 4GA OUT
• Platinum-look finish
• 24K hard gold-plated hardware
• Durable injection molded, black base and
clear acrylic cover
$10.16 |
PDB4
DISTRIBUTION BLOCK
(1) 1/0 IN, (4) 4GA OUT
• Platinum-look finish
• 24K hard gold-plated hardware
• Durable injection molded, blue base and
clear acrylic cove
$15.37 |
GDB1
DISTRIBUTION BLOCK
(1) 4GA IN, (4) 8GA OUT
• 24K hard gold-plated
• Durable injection molded, heat
resistant, clear acrylic base and cover
• Use with Raptor battery cable and gold
fuses for best performance
$7.54 |
| GDB2
DISTRIBUTION BLOCK
(1) 1/0GA IN, (4) 4GA OUT
• 24K hard gold-plated
• Durable injection molded, heat
resistant, clear acrylic base and cover
• Use with Raptor battery cable and gold
fuses for best performance
$15.10 |
|
Audio Installation
Products
